Changing The Shelf Manager Ip Address And Default Gateway - Fortinet FortiGate-5144C Manual

Compatible with fortigate-5000 series
Table of Contents

Advertisement

Shelf Manager CLI

Changing the shelf manager IP address and default gateway

You can configure the shelf manager IP address and gateway so that you can use telnet or ssh to access the Shelf
Manager instead of the serial console port. You can view the current LAN configuration with the following command:
# clia getlanconfig 1
Pigeon Point Shelf Manager Command Line Interpreter
Authentication Type Support: 0x15 ( None MD5 Straight Password/Key )
Authentication Type Enables:
  Callback level: 0x00
  User level: 0x15 ( "None" "MD5" "Straight Password/Key" )
  Operator level: 0x15 ( "None" "MD5" "Straight Password/Key" )
  Administrator level: 0x15 ( "None" "MD5" "Straight Password/Key" )
  OEM level: 0x00
IP Address: 192.168.0.2
IP Address Source: Static Address (Manually Configured) (0x01)
MAC Address: 00:50:c2:3f:f0:9a
Subnet Mask: 255.255.255.0
IPv4 Header Parameters: 0x40:0x40:0x10
Primary RMCP Port Number: 0x026f
Secondary RMCP Port Number: 0x0298
BMC-generated ARP Control: 0x02
  Enable BMC-generated ARP Response
Gratuitous ARP Interval: 2.0 seconds
Default Gateway Address: 192.168.0.1
Default Gateway MAC Address: 00:09:0f:09:32:03
Backup Gateway Address: 0.0.0.0
Backup Gateway MAC Address: N/A
Community String: "public"
Number of Destinations: 16
Destination Type:
  DST Type # 2, Type: Unacknowledged PET Trap Destination (0x00), ACK Timeout / Retry
Interval: 0 seconds,
Retries: 0
Destination Address:
  DST Addresses # 2, Address Format: IPv4 IP Address followed by DIX ethernet / 802.3 MAC
Address (0x00) Gateway: Default (0x00), Alerting IP: 192.168.182.86, Alerting MAC:
00:09:0f:09:32:03
You can use
the clia setlanconfig command to modify the shelf manager LAN configuration.
# clia setlanconfig
Pigeon Point Shelf Manager Command Line Interpreter
Error: too few parameters
  Sets the LAN settings
parameter:
  2 or "auth_enables"
  3 or "ip"
  6 or "subnet_mask"
  7 or "ipv4_hdr_param"
  10 or "arp_control"
  11 or "arp_interval"
  12 or "dft_gw_ip"
  14 or "backup_gw_ip"
  16 or "community"
FortiGate-5144C 6.2.3 Chassis Guide
Fortinet Technologies Inc.
43

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fortigate-5000 seriesFortigate-5060

Table of Contents