Table of Contents
Advertisement
5
Maintenance
5 – 1
Fuse replacement
1
The fuse box is set in a Inlet with power supply fuse.
Push the claws on both sides of the cap inward and
pull it out.
①
2
Two fuses are used. When replacing them, replace
both with the specified fuses.
When replacing the fuses, turn off the controller's power switch and then unplug the power cord from the power
your input power supply.
Use fuses specified by us. Designated fuses T1.6AH 250V
5 – 2
Care
When the controller and handpiece are dirty, wipe them up well with a dry cloth.
②
WARNING
3
Push the claws of the cap firmly into the inlet box.
32
Advertisement
Table of Contents
