How To Use - Nakanishi Sonic Cutter ZERO Operation Manual

4

How to use

Basic Operation
2
3
3 Startup / Stop
You can start and stop the program in one of the following two ways
(1) Manual ON / OFF
Press the ON / OFF key to activate
and Stop.
If it is started by the ON / OFF key, it can only be
stopped by the ON / OFF key.
The ON / OFF key and the LED on the handpiece light up when starting up.
As long as the LED is on, it is vibrating.
4
Power off
Setting the WATT display (see "6 – 4 Setting the watt display and amplitude display."), use 8W or less for
continuous use.
Using the handpiece at high power can cause the blade to become very hot,which can cause handpiece failure
and injury.
Do not plug or unplug the handpiece and foot switch while the foot switch is depressed. Failure to do so may
result in failure or malfunction.
1, 4
1
Power ON
The LED on the control panel lights up.
2
Power level adjustment
Press and hold down the key
to activate the key repeat function.
(2) When using the foot switch(Optional)
Activated the handpiece by
pressing the pedal.
Release the pedal to stop.
(See "6 – 5 Setting the foot switch")
If activated by a foot switch, it can only be stopped
by a foot switch.
CAUTION
31
UP key
DOWN key