Preparation Before Use; Connecting The Main Power Cord; Connecting The Handpiece; Connecting The Foot Switch(Optional) - Nakanishi Sonic Cutter ZERO Operation Manual

3

Preparation before use

3 – 1

Connecting the main power cord

1
Make sure the main power switch is in the OFF
position.
3 – 2

Connecting the handpiece

Align the plug of the handpiece with the handpiece socket on the back of the controller and insert it.
3 – 3

Connecting the foot switch(optional)

When using a foot switch, align the foot switch plug with the foot switch socket and insert.
2
Insert the main power cord into the Inlet with power
supply fuse. Then plug it into a commercial power
outlet.
29