Refresh The Browser - Micromeritics GEOPYC 1365 Operator's Manual

S M
TANDBY ODE
To activate standby mode, press the Standby button. The touch screen will turn off and the
Standby button LED illuminates blue.
To exit standby mode, press the (blue) Standby button. The status bar LED illuminates blue when
exiting standby mode only if the plunger is not at the home position. In this case, it illuminates blue
while the plunger is returning to home position. Once the plunger returns to home position, the status
bar LED turns green indicating that the analyzer is ready to be used.
R B
EFRESH THE
If a keyboard is attached or removed from the analyzer, the browser will need to be refreshed.
One method to refresh the browser is to power the analyzer OFF, attach or remove the
keyboard, then power the analyzer back ON. Alternatively, use the following instruc-
tions.
Attach a keyboard and refresh the browser:
1. With the browser open, attach the keyboard.
2. Press F5 or Ctrl+R on the attached keyboard. When the browser completes the refresh pro-
cess, the virtual keyboard will be disabled and the attached keyboard can be used.
Remove the keyboard and refresh the browser:
1. With the browser open, press Ctrl+W on the attached keyboard.
2. Remove the keyboard before the browser refresh process completes. When the browser com-
pletes the refresh process, the virtual keyboard can be used.
GeoPyc 1365 Operator Manual
136-42800-01 (Rev -) — Dec 2016
ROWSER

Refresh the Browser

6 - 7