Table of Contents
Advertisement
Quick Links
1. Product Name
Mirror Ball Stand & Spotlight Set
2. Product Code
18292
3. Colour
As shown above
4. Brief Description
Compact and portable set
5. Contents
• 1 x 20cm (8") mirror ball on a circular stand
• 1 x mini spotlight with integral adjustable angle stand
• 4 x colour filters
• 2 x 12V mains adapters
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Rompa 18292
Summary of Contents for Rompa 18292
- Page 1 1. Product Name Mirror Ball Stand & Spotlight Set 2. Product Code 18292 3. Colour As shown above 4. Brief Description Compact and portable set 5. Contents • 1 x 20cm (8”) mirror ball on a circular stand • 1 x mini spotlight with integral adjustable angle stand • 4 x colour filters • 2 x 12V mains adapters ...
- Page 2 6. Snoezelen® Stimulations • Visual 7. Best Use On a flat, stable surface, out of reach. This product is for visual purposes only. 8. Compatible ROMPA® Products This product is a set with everything you need to create beautiful visual effects. Visit www.rompa.com for more information about our other mirror balls and spotlights. 9. Starting Up • Connect the 12V mains adapter to the mirror ball stand. • Connect the other 12V mains adapter to the mini spotlight. • Add a filter to the mini spotlight if a particular colour is required. • Position the mini spotlight so it points at the mirror ball. • Plug in both adapters. • Switch on the mirror ball stand. 10. Detailed Description Compact and portable set including: • 20cm mirror ball with integral stand • mini spotlight with integral angle‐adjustable stand ...
- Page 3 12. Technical Specification Size: Mirror ball stand 18cm diameter Mirror ball 20cm diameter Mirror ball and stand overall height 27cmH Mini spotlight: 12L x 6.5W x 10cmH Adapter cable: 175cmL Weight: Mirror ball and stand 1kg Mini spotlight 100g Adapter 800g Lamp: 12V 10W3.5cm diameter Adapter for mini spotlight: AC/AC adapter Input: 240V~50Hz ...
- Page 4 13. Installation Choose a suitable location for your Mirror Ball Stand & Spotlight Set, bearing in mind the following: • The weight of the product – see Specification • The need for 2 wall electrical sockets • The length of the cable on each adapter – see Specification • These are visual products and should be out of reach • The components should be on a flat, stable surface free of obstacles Connect the 12V mains adapter that is packed with the mirror ball stand to the mirror ball stand. ...
- Page 5 Connect the other 12V mains adapter that is packed with the spotlight to the mini spotlight. Add a filter to the mini spotlight if a particular colour is required. The filter slides into the slot at the front of the spotlight. Use the small tab on each filter to help pull and push these in and out of place. Adjust the angle of the integral stand of the mini spotlight as required. The mini spotlight may be bolted down to a shelf or a ceiling. There is a pre‐drilled hold in the stand (bracket) that is 1cm diameter. No fixing is included as this will depend on the construction of your shelf/ceiling. ...
- Page 6 • Keep all components free of dust and debris for optimal operation. • Once eventually exhausted, dispose of this product appropriately and responsibly. • Please label each adapter so you know which adapter belongs with which component. It does not matter if you use the mini spotlight adapter with the mirror ball stand and vice‐versa, but it is advisable to label all adapters should they become confused with adapters for other products with different inputs/outputs by accident. 15. Troubleshooting In the unlikely event of product failure, please check the following: Problem: The mirror ball does not turn • Check that the adapter is plugged in and that the ON/OFF button is set to ON • Check the mirror ball is properly set into the mirror ball stand (straight not at an angle) Problem: The mini spotlight does not work • Check that the adapter is plugged in and replace the lamp as necessary Further copies of these instructions can be downloaded at www.rompa.com We hope you find our instructions invaluable. If you have any suggestions for improving them further your comments will be greatly received – please contact us at producthelp@rompa.com MIRROR BALL STAND & SPOTLIGHT SET 18292, April 2012 Copyright ROMPA®Ltd ...
Need help?
Do you have a question about the 18292 and is the answer not in the manual?
Questions and answers