Table of Contents
Advertisement
Available languages
Available languages
V1.0
8 in. BENCH GRINDER WITH PCB LCD READOUT
1.
Maintain a firm grip on the workpiece and position your body
and arms to allow you to resist a kickback. Kickback can propel
the material in the direction of the grinding wheel's rotation.
2.
If kickback occurs, the workpiece may impact the users or
bystander's body, causing a serious injury.
3.
Use special care when working on corners, sharp edges or
flexible material.
4. Only use grinding accessories designed for the tool.
POWER TOOL PRECAUTIONS
1.
Do not allow the tool to run without load for an extended
period of time, as this will shorten its life.
2.
Do not cover the air vents. Proper cooling of the motor is
necessary to ensure normal life of the tool.
3.
Avoid unintentional starts. Ensure the switch is off when
connecting to the power source.
4. Disconnect the power source before installing or servicing
the tool.
5.
Only use accessories that are specifically designed for use
with the tool. Ensure the accessory is tightly installed.
6.
After making adjustments, make sure that any adjustment
devices are securely tightened.
7.
Remove adjusting keys and wrenches before turning the
tool on. A wrench or a key that is left attached to a rotating
part of the tool increases the risk of personal injury.
8.
Never force the tool. Excessive pressure could break the
tool, resulting in damage to your workpiece or serious
personal injury. If your tool runs smoothly under no load,
but does not run smoothly under load, then excessive
pressure is being used.
9.
Do not touch an operating motor. Motors can operate at
high temperatures and can cause a burn injury.
Visit www.princessauto.com for more information
8712135
7
Advertisement
Table of Contents
