Specifications; Hazard Definitions - pro.point 8712135 User Manual

8712135 8 in. BENCH GRINDER WITH PCB LCD READOUT
8 in. BENCH GRINDER WITH PCB
LCD READOUT

SPECIFICATIONS

Horsepower
Grinding Wheel Dimensions
Arbor Size
Grit
No Load Speed
Rating (Voltage, Current, Frequency)
INTRODUCTION
The 8 in. Bench Grinder with PCB LCD readout is used for hand
held grinding, sharpening and cleaning. It has a 1-1/2 HP
induction motor for quiet, smooth performance. The tool rests
are adjustable as are the safety eye shields. The heavy duty
cast iron base is predrilled to bolt the grinder to a workbench.
SAFETY
WARNING! Read and understand all instructions before using
this tool. The operator must follow basic precautions to reduce
the risk of personal injury and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or
inspection and maintenance instructions.

HAZARD DEFINITIONS

Please familiarize yourself with the hazard notices found in this
manual. A notice is an alert that there is a possibility of property
damage, injury or death if certain instructions are not followed.
2 For technical questions call 1-800-665-8685
1-1/2 HP
8 in. Diameter by 1 in. Thick
5/8 in.
36 and 60
1,800 to 3,450 RPM
120V, 12A, 60Hz
V1.0