2
BOW SECTION.
•
The Bow Rib tubes have a single band of coloured tape
(red, green, yellow, blue and black).
•
The Bow Reinforcement Bars have one band of coloured
tape and one band of white tape.
•
Fold out bow section. Shockcorded tubes take shape.
Attach second Bow Keel Assembly (with one welded plate
and two tubes attached, one black tape.)
•
Attach keel bar with black plastic block and hole for
spring button.
3
ATTACH SMALL #1 CROSSRIB TO BOW SECTION.
•
There are six high density polyethylene Crossribs.
Each one is numbered.
•
Tilt crossrib above Keel Bar. Pin on small crossrib is inserted
into hole in plastic block on keel tube.
•
Attach Gunwale tubes in notched connection on upper
section of crossrib.
Feathercraft
Khatsalano
8