Feathercraft Khatsalano Manual page 27

Slider buckle
B
•
•
Fold webbing to
make a V
C
•
Ladder-lock buckle
CONNECT CABLE ADJUSTER TO STAINLESS STEEL CABLE.
This is to attach the adjuster if you have installed the
rudder from a kit.
Slide end of webbing through slider buckle. Thread the
webbing through the loop in the stainless steel rudder
cable. Fold or "pinch" webbing to make a V. Re-thread
webbing through slider buckle.
CABLE LENGTH ADJUSTMENT
To shorten cable length, pull on tab of webbing with loop;
to lengthen, lift tab of ladder-lock buckle.
Tab with loop
Feathercraft
Khatsalano
26