Heron Folding Kayak Comfortable sling seat Built in coaming Hull reinforced on outside over removeable air sponsons inside skin along gunwales keel and chine bars Feathercraft Heron...
Pivot foot Brace Crossribs: 1/2” High density Polyethylene Calf Plates skin Material: Welded urethane Medium bow hatch small and large stern hatch repair kit Pack Bag rudder Assembly instructions Feathercraft Heron...
Heron Frame deck bars are at the top of the frame, Gunwale bars are the upper under the deck most along the side keel bars are on the bottom Chine bars are along the side, next up of the kayak...
If you should leave your repair kit. your boat assembled for a maximum of two months, this will assist in preventing tubes seizing. Feathercraft Heron...
Page 7
It is advisable to periodically reinflate the sponsons. After paddling on hot days, release air from sponsons. Feathercraft Heron...
Heron Frame Parts stern deck bar/vertical keel extension bar lever bar skin crossribs seat pivot pedals chine & gunwale extension bars in seat sling coaming rim inserts Feathercraft Heron calf-plates hatch rims cockpit bracing bars...
Page 9
SeT ouT FRAMe PARTS AS IlluSTRATeD on THe PRevIouS PAge stern and bow frame sections. • stern section has the double Bow deck bars have the single Bow section has foot track. bands of black tape. band of white tape. (see next page) Feathercraft Heron...
Page 10
ASSeMBle BoW SeCTIon • “Shake” out bow section. • Attach #1 bow crossrib to bow section. shock corded tubes take shape. Pin on crossrib goes into black block. Bow section with foot track. Feathercraft Heron...
Page 11
ASSeMBle STeRn SeCTIon • Shake out stern section as you did the bow. • Attach stern deck bar with double band of black tape. • #6 and #5 crossrib are attached the same as #1 and #2 for the bow. Feathercraft Heron...
Page 12
Wrap these around keel bar. • Insert keel bar, sliding apart to connect bow and stern keel bars. stern Feathercraft Heron...
Page 13
When using the lever bars to extend, situate yourself across from the parts you are working on. each extension bar should be extended to the same position. Feathercraft Heron...
Page 14
InSTAllIng lARge CRoSSRIBS Insert #3 crossrib to bow. Crossribs slide over spring button. screw end fits into black block. spring button Insert #4 crossrib to stern. under deck webbing with buckle loops around stern crossrib. Inside of the skin Feathercraft Heron...
Page 15
Hatch stern bar Cockpit • Insert Stern deck bar/vertical lever bar through the hatch. Bar slides through hole in top of crossrib #4; slide back to connect to deck bar, then twist to lock. Feathercraft Feathercraft Heron Heron...
Page 16
InSTAll ReMAInIng BoW DeCK BAR Insert deck bar through keyhole rotate deck bar to lock Feathercraft Heron...
Page 17
(a) through hole in large stern crossrib. Insert bow end (b) through hole in large bow crossrib. slide over- rim insert sleeve towards stern till snug and spring button appears. stern • Web strap goes around gunwale bar and thigh brace. Gunwale bar thigh brace Feathercraft Heron...
Page 18
InSTAll HATCH RIM AnD CoveRS • Small and large hatch rims are installed at the stern. Medium hatch is on the bow. remember to remove hatch rims when rolling up the skin. InSTAll RuDDeR Feathercraft Heron...
Page 19
CAutIon: If you leave the kayak sitting in the sun, release air from sponsons. InSTAll SeAT • Inflate air bladder in the seat back to suit personal comfort. Calf plates ATTACH CAlF PlATeS To CRoSSRIB #3 Feathercraft Heron...
Page 20
Bungee cord with clips foot pedals fold flat for easy gear loading. When using the sea sock, no need to use bungee to hold the pedals in the upright position. the sock keeps them from falling forward. Feathercraft Heron...
Tips on Usage and Installation great safety item. the top of the sock fits tightly around • The embroidered Feathercraft label indicates the the cockpit coaming rim. Contoured to fit along the “right” side of the sock. seatback and bottom, the “foot” is loose through the •...