Synthes MatrixRIB Quick Reference page 4

3
Approximate rib segment and select plate
Approximate broken rib segments using forceps.
5b
Cut plate
If necessary, cut the plate to length to match the template.
Caution: Use a minimum of three screws on each side
of the fracture.
4
Cut and contour the plate template option l
Contour the template to the rib.
6
Contour plate
Bend the plate to match the template, using the
bending pliers, if necessary
Caution: Avoid sharp bends, reverse bends, bending the
plate at a screw hole, and notching or scratching the plate.
5a
Select plate
Use the plate template to select the plate, if necessary.
7
Position plate
Use the plate holding forceps to hold the plate over the
fracture, allowing a minimum of three screws on each
side of the fracture.
Caution: Insert the forceps from the superior border of
the rib, to avoid the nerve and vessel bundle located
along the inferior border of the rib.