Supermicro SuperServer 220HE-FTNR User Manual page 101

Note: Do not interrupt this process until the BIOS flashing is complete.
9. The screen above indicates that the BIOS update process is complete. When you see the
screen above, unplug the AC or DC power cable from the power supply, clear CMOS, and
plug the AC or DC power cable in the power supply again to power on the system.
10. Press <Del> continuously to enter the BIOS Setup utility.
11. Press <F3> to load the default settings.
12. After loading the default settings, press <F4> to save the settings and exit the BIOS
Setup utility.
Chapter 7: Troubleshooting and Support
101