HP PtoLiant DL140 Setup And Installation Manual page 17

CAUTION: Before removing the server access panel, be sure that the server is
powered down and that the power cord is disconnected from the server or the
electrical outlet.
CAUTION: Electrostatic discharge can damage electronic components. Be sure you
are properly grounded before beginning any installation procedure.
1. Unscrew the rear access panel retention screw
2. Slide the access panel toward the rear of the unit, about 1.25 cm (0.5 inch), and lift the panel
to remove it.
HP ProLiant DL140 Server Setup and Installation Guide
All manuals and user guides at all-guides.com
9