Section 6 Accessories And Spare Parts; Sensor Spare Parts; Recharge Kits For C1100 Sensors; Flow Chambers And Installation Devices - Hach LANGE ORBISPHERE C1100 User Manual

Section 6

6.1 Sensor spare parts

Part N°
C1100-S00 Electrochemical ozone sensor, Stainless Steel version, maximum pressure 40 bar, with Smart capability
C1100-T00 Electrochemical ozone sensor, Titanium version, maximum pressure 100 bar, with Smart capability
28104 Stainless steel sensor collar
28129 Delrin storage cap (sensor storage cap)
29006.1 Viton O-ring set for standard flow chambers (32001, 32002, 32007, 32009) and 29501 sensor socket.
(34x2 mm & 28x2 mm)
29006.2 Kalrez O-ring set for standard flow chambers (32001, 32002, 32007, 32009) and 29501 sensor socket.
(34x2 mm & 28x2 mm)
29006.4 Nitril O-ring set for standard flow chambers (32001, 32002, 32007, 32009) and 29501 sensor socket.
(34 x 2 mm & 28 x 2 mm)
29037 Regeneration cell for 32301 electrochemical sensor cleaning and regeneration unit
32205 Sensor support (base) for ORBISPHERE 31xxx and x1100 family EC sensors
32301 Electrochemical sensor cleaning and regeneration unit
33051-SG Stainless steel 28mm cap with grille for ORBISPHERE x1100 family EC sensors
33051-TG Titanium 28mm cap with grille for ORBISPHERE x1100 family EC sensors

6.2 Recharge kits for C1100 sensors

Part N°
29552A-C Recharge kit of 4 pre-filled cartridges with premounted 29552A membranes for C1100 ozone sensors.
Includes O-rings, cotton filters, cleaning tools and filter washers
2956A-C Recharge kit of 4 pre-filled cartridges with premounted 2956A membranes for C1100 ozone sensors.
Includes O-rings, cotton filters, cleaning tools and filter washers

6.3 Flow chambers and installation devices

Part N°
29501.1 Sensor socket for welding to SS pipe, with Viton O-ring
32001.110 Flow chamber in stainless steel (316) with 6 mm fittings. Supplied with Viton O-rings
32001.111 Flow chamber in stainless steel (316) with ¼" fittings. Supplied with Viton O-rings
32001.140 Flow chamber in Hastelloy with 6 mm fittings. Supplied with Viton O-rings
32001.141 Flow chamber in Hastelloy with ¼" fittings. Supplied with Viton O-rings
32001.150 Flow chamber in Titanium with 6 mm fittings. Supplied with Viton O-rings
32001.151 Flow chamber in Titanium with ¼" fittings. Supplied with Viton O-rings
32001.170 Flow chamber in Monel with 6 mm fittings. Supplied with Viton O-rings
32001.171 Flow chamber in Monel with ¼" fittings. Supplied with Viton O-rings
32003 Sensor insertion device; for use with Tuchenhagen adapter
33095 28 mm stationary housing for installation on Varinline® access units
Accessories and Spare Parts
Table 3 Sensor spare parts
Table 4 Recharge kits for C1100 sensors
Table 5 Flow chambers and installation devices
Description
Description
Description
33