CAUTION:
1. Before starting installation of this fixture or removal of a previous
fixture, disconnect the power by turning off the circuit breaker or by
removing the fuse at the fuse box.
2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY
ELECTRICAL QUESTIONS.
3. If you have any non-electrical questions about this fixture, please
contact our Customer Service Team at 1-800-986-3460 or visit
www.homedepot.com. Please reference your SKU (100xxxxxxx
Brushed Nickel fixture) or UPC (718212174159 Brushed Nickel fixture).
4. Keep your receipt and these Instructions for Proof of Purchase.
TOOLS REQUIRED FOR ASSEMBLY & INSTALLATION
(not included):
Wire cutters
Flathead screwdriver
Safety goggles
Phillips screwdriver
Step Ladder
Electrical tape
Wire strippers
Page 3
Need help?
Do you have a question about the 100 Series and is the answer not in the manual?