Resetting The Nbg To Its Factory Defaults; Wireless Router/Ap Troubleshooting - ZyXEL Communications NBG6515 User Manual

Make sure that you select the
Make sure that the keywords that you type are listed in the
If a keyword that is listed in the
keyword blocking using commands. See the Customizing Keyword Blocking URL Checking section in the
Content Filter chapter.
26.4 Re se tting the NBG to Its Fa c to ry De fa ults
If you reset the NBG, you lose all of the changes you have made. The NBG re-loads its default settings,
and the password resets to
You will lose all of your changes when you push the
To reset the NBG,
Make sure the power LED is on.
1
Press the
2
RESET
Press the
3
RESET
configurations.
If the NBG restarts automatically, wait for the NBG to finish restarting, and log in to the Web Configurator.
The password is "1234".
If the NBG does not restart automatically, disconnect and reconnect the NBG's power. Then, follow the
directions above again.
26.5 Wire le ss Ro ute r/ AP T ro ub le sho o ting
I cannot access the NBG or ping any computer from the WLAN (wireless AP or router).
Make sure the wireless LAN is enabled on the NBG
1
Make sure the WiFi adapter on the WiFi station is working properly.
2
Make sure the WiFi adapter installed on your computer is IEEE 802.11 compatible and supports the same
3
WiFi standard as the NBG.
Make sure your computer (with a WiFi adapter installed) is within the transmission range of the NBG.
4
Check that both the NBG and your WiFi station are using the same WiFi and WiFi security settings.
5
Chapter 26 Troubleshooting
Ena b le URL Ke ywo rd Blo c king
Ke ywo rd L ist
. You have to make all of your changes again.
1234
button for longer than 1 second to restart/reboot the NBG.
button for longer than five seconds to set the NBG back to its factory-default
NBG6515 User's Guide
check box in the Content Filtering screen.
Ke ywo rd L ist
is not blocked when it is found in a URL, customize the
button.
RESET
167
.