ZyXEL Communications NBG6515 User Manual page 16

Be c a re ful to a vo id da m a g ing pipe s o r c a b le s lo c a te d inside the wa ll
whe n drilling ho le s fo r the sc re ws.
If using screw anchors, drill two holes for the screw anchors into the wall. Push the anchors into
3
the full depth of the holes, then insert the screws into the anchors. Do not insert the screws all
the way in - leave a small gap of about 0.5 cm.
If not using screw anchors, use a screwdriver to insert the screws into the wall. Do not insert the
screws all the way in - leave a gap of about 0.5 cm.
Make sure the screws are fastened well enough to hold the weight of the NBG with the
4
connection cables.
Align the holes on the back of the NBG with the screws on the wall. Hang the NBG on the
5
screws.
Figure 2 Wall Mounting Example
Chapter 1 Getting to Know Your NBG
NBG6515 User's Guide
16