Navigation Panel - ZyXEL Communications NBG6515 User Manual

Table 25 Status Screen: Router Mode (continued)
L ABEL
Data
System Up Time
Current Date/Time
System Resource
- CPU Usage
- Memory Usage
System Setting
- Firewall
- Bandwidth
Management
- UPnP
- Configuration Mode
IPv6 Status
Item
Data
Interface Status
Interface
Status
Rate
Summary
DHCP Table
Packet Statistics
WLAN Station Status
7.3.1 Na vig a tio n Pa ne l
Use the sub-menus on the navigation panel to configure NBG features.
Chapter 7 Router Mode
DESC RIPT IO N
This column shows the actual data recorded by the NBG.
This is the total time the NBG has been on.
This field displays your NBG's present date and time.
This displays what percentage of the NBG's processing ability is currently used. When this
percentage is close to 100%, the NBG is running at full load, and the throughput is not going to
improve anymore. If you want some applications to have more throughput, you should turn off
other applications (for example, using bandwidth management.)
This shows what percentage of the heap memory the NBG is using.
This shows whether the firewall is enabled or not.
This shows whether the bandwidth management is enabled or not.
This shows whether UPnP is enabled or not.
This shows the web configurator mode you are viewing -
This column shows the type of data the IPv6 is using.
This column shows the actual data used through the IPv6.
This displays the NBG port types. The port types are:
For the LAN and WAN ports, this field displays
For the WLAN, it displays
Up
For the LAN ports, this displays the port speed and duplex setting or
disconnected.
For the WAN port, it displays the port speed and duplex setting if you're using Ethernet
encapsulation and (line (ppp) idle),
Idle
if you're using PPPoE encapsulation. This field displays
For the WLAN, it displays the maximum transmission rate when the WLAN is enabled and
when the WLAN is disabled.
Click to go to the
De ta ils... Mo nito r > DHC P T a b le
to view current DHCP client information.
Click to go to the
De ta ils... Mo nito r > Pa c ke t Sta tistic s
screen to view port status and packet specific statistics.
Click to go to the
De ta ils... Mo nito r > WL AN 2.4G / 5G Sta tio n Sta tus
35). Use this screen to view the WiFi stations that are currently associated to the NBG.
NBG6515 User's Guide
WAN
(line is down) or
Do wn
when the WLAN is enabled or
(starting to trigger a call) and
Dia l
N/ A
screen
screen
51
.
Expe rt
, and .
L AN WL AN
(line is up or connected).
Up
when the WLAN is disabled.
Do wn
when the line is
N/ A
(dropping a call)
Dro p
when the line is disconnected.
(Section 4.4 on page 32). Use this screen
(Section 4.5 on page 33). Use this
screen (Section 4.7 on page
N/ A