How To Select The Print Server (Tcp/Ip) - Brother NC-9100h Network User's Manual

How to Select the Print Server (TCP/IP)

After installing the PPD, use the following steps to select the printer
driver:
1
Turn the power of the printer ON.
2
Open the Applications folder.
3
Open the Utilities folder.
4
Open the Print Center Icon.
5
Click the Add Printer button.
6
Select LPR Printers using IP.
7
Enter the TCP/IP address of the printer into the LPR Printer's
Address box.
Printing the configuration page will allow you to confirm the TCP/IP
address. For information on how to print the configuration page, see
Resetting the Print/Fax Sever back to factory settings (Test Switch)
on page 13-4.
8
If you are not using the default Queue enter the Queue name
you are using.
9
From the Printer Model pull-down list select your model.
10
Click Add and the printer will be available from the Printer List.
7 - 9 PRINTING FROM A MACINTOSH
®