Driver Deployment Wizard; Tcp/Ip Printing - Brother NC-9100h Network User's Manual

Driver Deployment Wizard

This installer includes the Windows
port driver (LPR and NetBIOS).
If the administrator then installs the printer driver and port driver
using this software, he can save the file to the File server or send the
file in E-mail to users. Then, each user just clicks that file to have the
printer driver, port driver, IP address, and so on, automatically copied
to their PC.
For more information, see the Driver Deployment Wizard User's
Guide on the CD-ROM.

TCP/IP Printing

Our Peer to Peer printing software requires the TCP/IP protocol to be
installed on your Windows
Address has to be defined for the Print/Fax server. Refer to your
®
Windows documentation for more information on how to configure
the TCP/IP protocol on your Windows
If you haven't already done so, configure the IP address of the
machine, for more information on IP address configuration, see
chapter 11 of this User's Guide.
Installing the Brother Peer to Peer Software
If you already installed the driver from the printer's CD-ROM
Installer and you selected "Brother Peer-to-Peer Network
Printer" during the installation then you do not need to install
the Brother Network Print Software again.
1
Start the CD-ROM installation menu program according to the
Quick Setup Guide.
2
Select Install software menu. Then select Network
Applications for Optional NC-9100h.
3
Push the Next button in response to the Welcome message.
4
Select the Brother Peer to Peer Print (LPR) button.
3 - 2 PEER TO PEER PRINTING
®
PCL driver and Brother network
®
peer-to-peer computers and an IP
®
PC.