Associating The Printer; Windows 98/Me - Brother NC-9100h Network User's Manual

7
You must now enter the server name and port name for the
actual Print/Fax server. You can use the Browse button to
search for the Print/Fax server, select the domain/workgroup
name, and then the server is listed. If the print server does not
automatically appear in your browse list, then you must ensure
that the domain name is configured correctly. Otherwise you
must enter the name manually. The name should be compliant
with UNC (Universal Name Convention). For example:
\\NodeName\ServiceName.
Where NodeName is the NetBIOS name of the Brother Print/
Fax server (the default name is usually BRN_xxxxxx, where
xxxxxx is the last six digits of the Ethernet address), and
ServiceName is the service name for NetBIOS of the Print/
Fax server. By default it is BINARY_P1. For example:
\\BRN_310107\BINARY_P1
You can find the NetBIOS name and MAC address by
printing out the printer configuration page. see Resetting the
Print/Fax Sever back to factory settings (Test Switch) on
page 13-4 for information on how to print the configuration
page on your Print/Fax server.
8
Then press OK.
9
Click the Finish button. You must now restart your computer
before you can continue.

Associating the Printer

1
You must now create a printer on your Windows
XP and Windows NT
®
Windows
button, select Setting and then Printers.
®
Windows 98/Me
2
Select Add Printer to begin the printer installation.
3
Click Next when you get the Add Printer Wizard window.
4 - 5 NETBIOS PEER TO PEER PRINTING
®
4.0 systems using the standard
printer setup procedure. To do this, go the Start
®
98/Me/2000/