Sending An Internet Fax; Manually Entering Text - Brother NC-9100h Network User's Manual

Sending an Internet Fax

Sending an Internet Fax is the same as sending a normal Fax. If you
have already programmed the addresses of the Internet Fax
receivers into the MFC as Speed-Dial locations, you can send the
Internet Fax by loading the document into the MFC, use the Fax
Resolution key to set the preferred resolution and select a Speed-
Dial number and pressing Start.
This will differ depending on the whether your MFC contains
Speed-Dial keys or includes Navigator Keys.
If you wish to manually enter the Internet Fax Address load the
document into the MFC and press
change into the "alphabet" dialling mode.
To manually enter the Internet Fax address, see Manually Entering
Text on this page.
Internet Fax specification does not support color resolutions
and files types.

Manually Entering Text

Shift
Press and
dialling mode.
You can now use the Dial Pad to dial the E-mail address. Refer to the
following table: Most number keys have three or four letters printed
above them. The keys for 0, #, * don't have printed letters because
they are used for special characters.
1
simultaneously to change into the "alphabet"
INTERNET FAX (MFC ONLY) 12 - 3
Shift 1
and simultaneously to