Table of Contents
Advertisement
Assembly
Check to ensure that all components are included:
Mast with boom, lift motor, carry bar, control box and battery pack.
Base with motor and locking handle. Handset and cord.
Instructions, charging cable and power supply cord for charging.
Place the mast in the base. There are three alternatives for adjusting the height of the
mast. Secure the mast with the locking handle.
Place the battery in the mount in the control box.
Mount handlebar with two wrenches.
Connect the cables: The cable for the handset in outlet HS; the cable for the hoist motor
in outlet M1, and the cable for the base motor in outlet M2.
Release the emergency stop and perform a final inspection (see final inspection).
HS
M1
M2
3
M A N U A L
Advertisement
Table of Contents
