Assembly - Vancare VanGo 600 Manual

cover
for the
cables
Handset 1

Assembly

Check to ensure that all components are included:
Mast with boom, lift motor, carry bar, control box and battery pack.
Base with motor and locking handle. Handset and cord.
Instructions, charger with cable and adapter for wall socket.
Place the mast in the base. There are three alternatives for adjusting the height of the
mast. Secure the mast with the locking handle.
Mount handlebar with two wrenches.
Connect the cables to the control box. Cable to actuator (motor on mast) to outlet
1. Mount the cover for the cables using the two screws.
Release the emergency-stop mechanism and perform a final inspection (see final
inspection).
3