Charging Batteries; Handset - Vancare VG400 Manual

6

Charging batteries

A tone when using the lift indicating that the batteries need recharging.
Charge the lift after use to ensure that the battery is always fully charged.
Lock the castor wheels when charging the battery.
1. Connect the charging cable to a power outlet.
2. Check to ensure that the lamps on the control box light up. The green LED lamp
indicates that the charger is receiving power and the yellow LED lamp indicates that the
battery is charging.
3. Charging stops automatically when the battery is fully charged.
Wall-mounted charger.
1. Remove the battery pack from the hoist and place it in the wall-mounted charger.
2. Check to ensure that the LED lamp on the front of the charger lights up.
NOTE!
Before the lift is used for the first time, it must be charged for at least 4 hours.
For maximum battery life, charge batteries regularly. We recommend daily charging when
the lift is used daily.
The emergency stop button must be pulled out during charging.

Handset

Raising/lowering the lift arm
Symbol indicate direction of travel.
Motion stops as soon as the button is released.
Widening/narrowing the base
Markings on the buttons indicate function.
Motion stops as soon as the buttons are released.
M A N U A L