NEC 65" InfinityBoard 2.1 User Manual page 13

Mount the speakers to the monitor
X
1. Remove screw
2. Using screws J and washers
left and right side.


OOTE: Most monitors will have a gasket strip attached to the monitor. If your monitor does not have the
gasket attached, it is a separate part in the box. Place a strip on each side of the monitor. The
strip fills the space between the speaker and the monitor when the speaker is in place.
3. Insert the brackets on the side of the
speaker with the slots in the mounting
bracket on the monitor. Carefully slide
the speaker down until it sits flush with
the display.

OOTE:

The side-mounted speakers
can be hooked onto the
brackets after the monitor is
mounted to the wall or trolley.
CAUOIO
E:

Never lift the monitor by the
speaker or speaker brackets.
from the back of the display.
K , attach the mounting brackets
J
K
X
L
A
A
English−13
L to the back of the monitor on both the
B