Manufacturer's Recycling And Energy Information; Nec Display Solutions - NEC 65" InfinityBoard 2.1 User Manual

Manufacturer's Recycling and Tnergy Information
NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of
the company's top priorities in trying to minimize the burden placed on the environment.
e are engaged
in developing environmentally-friendly products, and always strive to help define and comply with the latest
independent standards from agencies such as ISO (International Organization for Standardization) and TCO
(Swedish Trades Union).
Disposing of your old
TC product
The aim of recycling is to gain an environmental benefit by means of re-use, upgrading, reconditioning or
reclamation of material. Dedicated recycling sites ensure that environmentally harmful components are properly
handled and securely disposed. To ensure the best recycling of our products, NEC DISPLAY SOLUTIONS offers a
variety of recycling procedures and gives advice on how to handle the product in an environmentally sensitive
way, once it has reached the end of its life.
All required information concerning the disposal of the product and country-specific information on recycling
facilities can be found on our following websites:
https://www.nec-display-solutions.com/greencompany/ (in Europe),
https://www.nec-display.com (in Japan) or
https://www.necdisplay.com (in USA).
Tnergy Saving
This monitor features an advanced energy saving capability.
hen a Display Power Management signal is sent
to the monitor, the Energy Saving mode is activated. The monitor enters a single Energy Saving mode.
For additional information visit:
https://www.necdisplay.com/ (in USA)
https://www.nec-display-solutions.com/ (in Europe)
https://www.nec-display.com/global/index.html (Nlobal)
For Energy Saving information: [Default setting: Quick recovery Off]
For ErP requirement/For ErP (Network standby) requirement:
Exceptions to the power
consumption conditions below:
Power consumption (Nlowing amber): 2.0
or less (with 1 port connection)/3.0
or less (with all
ports connection).
Time for power management function: 10 sec. (Default setting)
Power consumption (Blinking amber): 0.5
or less.
Time for power management function: 3 min. (Default setting) (Except for a condition that the monitor
has plural signal inputs.)
The monitor is using an Option Board.
[INPUT DETECT] is set to a setting other than [NONE].
[USB PO
ER] is set to [ON].
DisplayPort in the [TERMINAL SETTINNS] is set to [MST].
English−28