Table of Contents
Advertisement
2. Locate the finger pull tabs on both sides of
the Printer Cover and lift with two fingers
as illustrated.
3. Remove the sticker to unfasten the roll.
Note: The sticker is not part of this toy and
should be discarded for your child's safety.
4. Insert the new roll of paper into the Paper
Roll Chamber as illustrated, ensuring that
the tail of the paper comes off the bottom
of the roll and not the top.
5. Leave a small amount of paper protruding
and close the Printer Cover.
6. Tear off the excess paper and use your
screwdriver to secure the Screw Lock in
the closed position.
Printing
In Camera or Video modes, press the Print
Button to bring up the print preview screen. From
here you can adjust the print intensity with the
icon or cancel with the
Button or check mark
image and save a digital copy.
Drawing on Thermal Paper
For best results we recommend using felt-tipped pens or markers.
icon. Press the Print
to proceed to print your
11
11
11
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the KidiZoom PrintCam and is the answer not in the manual?
Questions and answers
Paper loader won’t open despite putting it in unlocked position
The document does not provide specific reasons why the paper loader on the VTech KidiZoom PrintCam would not open even when it is in the unlocked position. However, possible reasons could include a jammed paper roll, improper positioning of the screw lock, or an obstruction in the paper chamber. Checking for these issues and ensuring the screw lock is fully disengaged may help resolve the problem.
This answer is automatically generated