Table of Contents
Advertisement
Zeus13 AIO
Flight Controller
Manual
Contents
Product Specifications.............................................................................................................................1
Interface Description...............................................................................................................................2
1
www.hglrc.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HGLRC Zeus13 AIO
Summary of Contents for HGLRC Zeus13 AIO
- Page 1 Zeus13 AIO Flight Controller Manual Contents Product Specifications..........................1 Interface Description..........................2 www.hglrc.com...
-
Page 2: Table Of Contents
VTX serial port use. VTX uses OSD smart audio................10 GPS parameters setting...........................11 Check receiver signal..........................12 Select flight mode startup mode......................13 OSD settings..............................14 LED settings..............................15 Troubleshooting............................16 ..................Package IncIuded Zeus13 AIO Flight Controller*1 Accessory Bag*1 1.Product Specifications Product parameters Model Zeus13 AIO Flight Controller Input Voltage 3-6S Usage... - Page 3 MPU6000 10V/1A 5V/2A BlackBox UARTS ESC Firmware BL32 Constant Current Peak Current 15A（5s） 2.Interface Description www.hglrc.com...
-
Page 4: Check The Flight Control Drive
3.Check the flight control drive Long Press BOOT buttons.connect USB.The system automatically www.hglrc.com... - Page 5 2.Driver cannot be installed, please download ImpulseRC_Driver_Fixer 3.Double-click on the run(Plug in the flight controller to automatically install the driver) 4.open betaflight configurator enter DFU mode ， 5.Click Select firmware version www.hglrc.com...
-
Page 6: Calibration Accelerometer
It will be prompted upon completion 7.open betaflight configurator Controller plugged into the computer. Betaflight Automatically assigned port click “Connect” Enter ， setup interface Different computer （ ） 4.Calibration accelerometer Put the aircraft horizontal and click“Reset Z axis” Click again www.hglrc.com... -
Page 7: Uart Serial Port Use
5.UART serial port use 1.UART1 uses Receiver 2.UART2 uses GPS 3.UART3 uses VTX 4.UART4 uses DJI 5.UART6 uses ESC telemetry 6.Select aircraft model Select model Click www.hglrc.com... -
Page 8: Choose Esc Protocol
I understand the risks Push Master to check motor Click Click “ ” steering Master Steering can be changed at BLHeliSuite32 “ ” 7.Choose ESC protocol 1.Choose the right ESC protocol, the optional universal protocol DSHOT600. www.hglrc.com... -
Page 9: Voltage And Current Parameters Setting
8.Voltage and current parameters setting Setting parameters 1.Click 9.Setting up the receiver 1.Receiver connection diagram www.hglrc.com... - Page 10 UART1 Open the receiver serial port 2.Click “ ” 3.Set the SBUS receiver 4.Set the DSMX receiver www.hglrc.com...
-
Page 11: Vtx Serial Port Use. Vtx Uses Osd Smart Audio
10.VTX serial port use. VTX uses OSD smart audio 1.VTX connection diagram 2.VTX serial port opens. The protocol is selected according to its own VTX protocol. www.hglrc.com... - Page 12 Roll-right will enter the sub-menu. For example, in the screen to the right, moving the cursor to “Features” and then moving the roll stick to the right will enter the “Features” sub-menu. www.hglrc.com...
-
Page 13: Gps Parameters Setting
The screen to the right shows the current vTX settings. From here, you can change the frequency band, channel, and power level of the video transmitter. After making the changes, move the cursor to “Set” and press roll-right to confirm the settings. 11.GPS parameters setting 1.GPS connection diagram www.hglrc.com... - Page 14 2.Open the GPS serial port 3.When using the GPS function, remember to configure the serial port (via the Ports tab). www.hglrc.com...
-
Page 15: Check Receiver Signal
12.Check receiver signal Check the remote control output signal 1.Click 13.Select flight mode startup mode 1.Click set up the function of remote control switch across the channel (below are for reference only) www.hglrc.com... -
Page 16: Osd Settings
14.OSD settings the OSD Settings, according to the need to choose, drag the 1.Click OSD schematic diagram of the parameters can be adjusted. 15.LED settings Turn on LED support Click 2.Click Click set according to need www.hglrc.com... -
Page 17: Troubleshooting
3. For domestic customers, please contact the after-sales service personnel. For overseas customers, please contact the official website for after-sales service. Product daily problems 1.OSD garbled: If you find garbled characters, please open Betaflight, click “OSD” .and click “Font Manager” clicks on “Upload Font” to update www.hglrc.com... - Page 18 "BBB" sound. There is only one sound. Please check if the ESC agreement is correct 3.The spin of the aircraft keeps spinning 1. Please check if the propeller is correct 2. Please check if the motor direction is correct www.hglrc.com...
Need help?
Do you have a question about the Zeus13 AIO and is the answer not in the manual?
Questions and answers