Table of Contents
Advertisement
activation time lim
This setting determines how long a time the outdoor temperature must ex-
ceed the stop limit before heat stop is activated.
Deactiv� time lim
Time limit for how long a time the condition for lifting the heat blocking must
be fulfilled before the block is lifted.
Pump exercise interval
Time interval for pump exercise of the main circulation pump during heat
stop.
Pump exercise time
This setting determines how long the main circulation pump is to run during
pump exercise.
3�6�5 Brine control
Brine control
Activates the brine control function with limitation of the maximum allowed
number of running pumps.
Brine out min temp
Lowest allowed temperature for outgoing brine.
Brine in min temp
Lowest allowed temperature for incoming brine.
Brine in max temp
Highest allowed temperature for incoming brine.
Time limit
Time limit before the number of running pumps is limited.
3�6�6 Hot water
start limit
Temperature limit for when a heat pump is started to make hot water.
Delta limit next hp
Temperature step size for the start of additional heat pumps to make hot wa-
ter. Is also used to reduce the number of running heat pumps as the tempera-
ture approaches Stop limit.
stop limit
Temperature limit for when hot water production should stop, for the heat
pumps not set to stop when the control presostat is triggered.
Top up function
Activation and deactivation of the top up function.
Danfoss – 25
Advertisement
Table of Contents
