I Installing The Connector On The Hose; I Connecti Ng The Hose To The Cleaner And Positi Oning The Fl Oats - Polaris QUATTRO Instructions For Installation And Use Manual

2.5 I Installing the connector on the hose

• Place the nut ( ) on the end of the connector (
• Push the hose into the connector, see image
• Firmly ti ghten the nut around the hose, see image
2.6 I Connecti ng the hose to the cleaner and positi oning the fl oats
• Push the connector ( ) into the cleaner. Rotate in the clockwise directi on to lock in positi on.
• Positi on the fi rst hose fl oat (
• Slide the fl oats along the hose to positi on them. The recommended distance between each fl oat is between 30 and
90 cm, see "1.2.3 Hose parts list".
), see image
. Water can be used to lubricate the hose.
.
ii i i
) against the connector.
.
EN
7