I Cleaning The In-Line Fi Lter Screen; I Storing And Winterising - Polaris QUATTRO Instructions For Installation And Use Manual

4.2 I Cleaning the in-line fi lter screen
• Turn off the booster pump;
• Loosen the in-line fi lter plug, see step
• Separate the in-line fi lter body from the plug, see step
• Remove the screen from the fi lter, see step
• Rinse with clean water, see step

4.3 I Storing and winterising

To prevent premature failure or damage, never store the cleaner in direct sunlight.
• Remove the cleaner from the pool and empty all the water out (damage due to ice is not covered by the guarantee).
• Clean the cleaner and the hose in clean water and leave to dry.
• Store in a dry place, protected from freezing temperatures and away from direct sunlight.
• Remove the quick disconnect plug (UWF®) (
fi tti ng ( ), use a pulling pressure as you unscrew. If necessary, use the removal tool (UWF®) available from your
retailer.
12
;
;
;
.
) from the dedicated cleaner wall fi tti ng using the quick disconnect