Error Message
1 BARCODE
PER BLOCK!
4 DIGIT
MIN.!
5 BLOCK
LIMIT!
7 LINE
LIMIT!
BATTERIES
WEAK!
BUFFER
EMPTY!
BUFFER
FULL!
CAN'T FEED
AV LABELS
108
ERROR MESSAGE LIST
Cause
This message appears if a barcode
has already been added to the block
when you try to use the Barcode
function.
This message appears when less than
the minimum four digits are entered
as barcode data.
This message appears if five text
blocks already exist when you hold
down c and press _.
This message appears if seven lines
already exist when you press _.
This message appears when the
installed alkaline batteries become
weak.
• This message appears if you hold
down c and press T, but
no text has been entered in the dis-
play.
• This message appears if you try to
print, but no text has been entered
in the display.
This message appears if you try to
enter a character, symbol, return or
space after the maximum number of
characters has already been entered.
This message appears if an AV label
cassette is installed when you hold
down c and press r.
Remedy
Limit the number of barcodes in
a block to one.
Enter a minimum of four digits
before pressing _.
Limit the number of text blocks
to five.
Limit the number of lines to
seven.
Replace the batteries or use the
AC adapter.
• Enter some text before starting
this function.
• Enter text before printing.
Delete some existing text so that
more text can be entered.
Install a tape cassette other than
an AV label cassette before hold-
ing down c and pressing
r.