Frame Function - Brother P-touch PT-2200 User Manual

With the Frame function, you can choose from various frames and highlights to design a more
decorative or emphasized label.
The following Frame settings are available:
OFF, SQUARE, ROUND, CANDY, POINTING, NAMEPLATE and DOT
The default frame setting is OFF; however, other settings are also available. When any setting
other than OFF is selected, the Undl/Frm indicator on the right side of the display lights up.
If the ON underline setting has already been chosen when a frame or highlight is
selected, the underline setting changes back to OFF and the text is framed or high-
lighted.
Refer to Reference at the end of this section for samples of the available settings.
To change the frame setting:
1 While holding down
current frame setting.
2 While still holding down
displayed.
The Undl/Frm indicator lights up when any setting other than OFF is selected.
3 Release
EXAMPLE
To select the CANDY frame setting:
1
While holding down
once, and keep
2
While still holding down
tinue pressing
played.
3
Release

FRAME FUNCTION

, press
, continue pressing
to apply the selected frame setting to the entire text.
Frame
until CANDY is dis-
.
Frame
once, and keep
Frame
Frame
, press
held down.
Caps
, con-
Caps
held down to display the
until the desired frame setting is
Alt F R A M E
O F F
F R A M E
Alt
C A N D Y
Length
Undl/Frm
Wide
Length
Undl/Frm
Wide
57