Style Function - Brother P-touch PT-2200 User Manual

You can choose from nine different character styles to apply to your text.
Characters printed using the smaller sizes may be difficult to read if certain style settings
(e.g., I+SHADOW) are selected.
The following style settings are available:
NORMAL
BOLD
OUTLINE
SHADOW
ITALIC
The default style setting is NORMAL. The style indicator at the bottom right of the display
shows the current style setting when any setting other than NORMAL is selected.
Refer to Reference at the end of this section for samples of the available settings.
To change the style setting:
1 While holding down
current style setting.
2 While still holding down
displayed.
The current style setting is shown by the style indicator at the bottom right of the
display.
3 Release
EXAMPLE
To select the I+SHADOW style setting:
1
While holding down
once, and keep

STYLE FUNCTION

I+BOLD (italic & bold)
I+OUTLINE (italic & outline)
I+SHADOW (italic & shadow)
VERTICAL
, press
, continue pressing
to apply the selected style setting to the entire text.
Style
once, and keep
Style
, press
held down.
Caps
held down to display the
Style
until the desired style setting is
Alt S T Y L E
N O R M A L
Length
Undl/Frm
Wide
51