User Safety - Xylem Bell & Gossett Autocirc e3-4 Series Installation, Operation And Maintenance Manual

Instant hot water recirculating systems
Table of Contents

Advertisement

en – Original Instructions
1.2.2

User Safety

IMPORTANT SAFETY INSTRUCTIONS
CAUTION:
When installing and using this equipment, basic safety precautions should
always be followed. Read, follow and save all these instructions!
WARNING:
To reduce the risk of injury, do not permit children to use this product unless
they are closely supervised at all times.
The pump models covered by this manual are certified generally under the safety standard UL
778, but in case of some special OEM models (usually with plastic pump housing for spa
application) the UL 1081 certification is also available. This reference is indicated on the data
plate, see item 1 in Figure 1 on page 12.
These pumps are also certified as a Drinking Water System Component according to
NSF/ANSI 61.
SAFETY INSTRUCTIONS according to UL 778
CAUTION:
Acceptable for indoor use only. This pump has been evaluated for use with water
only. Use with maximum 203 °F (95 °C) water.
WARNING: Risk of electric shock
This pump has not been investigated for use in swimming pool or marine areas.
This pump is not submersible.
WARNING: Risk of electric shock
This pump is supplied with a grounding conductor and grounding-type
attachment plug. To reduce risk of electric shock, connect only to a properly
grounded, grounding-type receptacle.
WARNING:
To reduce the risk of electric shock, replace damaged cord immediately.
For supply connection, use wires acceptable for at least 194 °F (90 °C).
Use copper conductors only.
SAFETY INSTRUCTIONS according to UL 1081
WARNING:
To reduce the risk of electric shock, replace damaged cord immediately.
WARNING: Risk of electric shock
Do not install within an outer enclosure or beneath the skirt of a hot tub or spa.
This pump is not submersible.
6
Installation, Operation and Maintenance Manual

Advertisement

Table of Contents
loading

Table of Contents