Xylem Bell & Gossett Autocirc e3-4 Series Installation, Operation And Maintenance Manual page 23

Permitted positions for recirculating pumps
Figure 8
Autocirc pumps - Installation sequence
1. First read and follow the concerning instructions in section 4.3.1 Guidelines for the
2. Fasten the Autocirc unit to the wall under the sink using the wall bracket provided in the
Figure 9
Installation, Operation and Maintenance Manual
hydraulic system on page 20-21.
Autocirc kit. Be sure the pump timer is turned toward the front and is accessible for setting
and changing the time. The pump must be installed only in vertical position, as shown in
Figure 9.
en – Original Instructions
23