Control Panel; Leds (Light Emitting Diodes) - Brother HL-2150N User Manual

4

Control Panel

LEDs (Light Emitting Diodes)

This section refers to three LEDs Toner, Drum and Error, and a dual function Ready LED & Go button on
the control panel.
The LED indications shown in the table below are used in the illustrations in this chapter.
1 Toner LED
2 Drum LED
1
2
3 Error LED
3
4 Ready LED
4
or
or or
or or
The Toner LED indicates when the Toner is low or at the end
of its life.
The Drum LED indicates when the Drum is nearing the end of
its life.
The Error LED indicates when the printer is in one of the
following states:
No paper / Paper jam / Cover open
The Ready LED will flash depending on the printer status.
Go button
Wake-up / Error recovery / Form feed / Job Cancel / Reprint
LED is off.
LED is on.
The LED is dimmed.
LED is blinking.
4
4
4
48