Copy; Pc-Fax; (For Mfc-8440 And Mfc-8840D Only); Device Setting (For Mfc-8440 And Mfc-8840D Only) - Brother MFC-8440 Software User's Manual

COPY

Copy — allows you to use the PC and any printer driver for
enhanced copy operations. You can scan the page on the machine
and print the copies using any of the features of the machine printer
driver—OR—you can direct the copy output to any standard printer
driver installed on the PC including network printers.
You can configure your preferred settings on up to four buttons.

PC-FAX

(For MFC-8440 and MFC-8840D only)

These buttons are for sending or receiving faxes using the Brother
PC-FAX application.
■
Send — enables you to scan a page or document and
automatically send the image as a fax from the PC using the
Brother PC-FAX software. (See PC-FAX sending on page 6-1.)
■
Receive — enables you to receive a PC-FAX by clicking this
button. After running the PC-FAX receive software, this button
changes to View Received to open the application and see the
received fax. (See Setting up PC-FAX receiving on page 6-19.)
When the machine is connected to a network, you cannot use
this function.
■
Address Book — enables you to open Brother PC-FAX address
book. (See Brother Address Book on page 6-7.)
■
Setup — enables you to configure the PC-FAX sending settings.
(See Sending setup on page 6-3.)
DEVICE SETTING
(For MFC-8440 and MFC-8840D only)
You can configure the machine setting.
■
Remote Setup — enables you to open the Remote Setup
Program. (See MFC Remote Setup on page 5-1.)
When the machine is connected to a network, you cannot use
this function.
USING CONTROLCENTER2.0 4 - 4