Scan to Image
When you select Scan to Image your document will be scanned and
sent directly to the PC you designated on your network.
ControlCenter2.0 will activate the default graphics application on the
designated PC. You can change the
to Image: on page 4-12.)
1
Place the document face up in the ADF, or face down on the
scanner glass.
2
Scan
Press
3
Press
Scan to Image .
Set
Press
.
4
Press
destination you want to send to.
Set
Press
.
If the LCD prompts you to enter a PIN Number, enter the 4-digit
PIN Number for the destination PC on the control panel.
Set
Press
.
The machine will start the scanning process.
.
or
to select
or
to select a
Scan
configuration. (See Scan
▲
Scan to E-Mail
Scan to Image
Scan to OCR
▼
Scan to File
▲▼
Select
NETWORK SCANNING 8 - 8
& Set