Network Scanning (Windows 98/98Se/Me/ 2000 Professional And Xp Only); Network License; Registering Your Pc With The Machine - Brother MFC-8440 Software User's Manual

8
Network Scanning
(Windows
The screens shown in this chapter are from MFC-8840D.
To use the machine as a Network Scanner, the NC-9100h Network
board should be installed into the machine and configured with
TCP/IP and mail server settings if you use Scan to E-mail (E-mail
server). You can set or change NC-9100h settings from your
machine's control panel, with the BRAdmin Professional utility and
with Web Management BRAdmin. (Please see the NC-9100h
Network User's Guide on the CD-ROM.)

Network License

This product includes a single PC license. If you purchase an
optional Network LAN board NC-9100h that includes the license for
up to 4 additional Users, you can install the MFL-Pro Software Suite
including ScanSoft
network. If you want to use more than 5 PCs with ScanSoft
®
PaperPort 9.0SE installed, please purchase NL-5 which is a
multiple PC license agreement pack for up to an additional 5 Users.
To purchase NL-5, please contact your Brother Sales Office.
Max. 25 clients can be connected to one machine on a Network.
For example, if 30 clients try to connect at a time, 5 clients will
not be shown on the LCD.

Registering your PC with the machine

If you need to change the machine that was registered to your PC
during the installation of MFL-Pro, follow the steps below.
1
For Windows
From the Start menu, select Control Panel, Scanners and
Cameras, and then right-click Scanner Device icon and select
Properties to view the Network Scanner Properties dialog box.
For Windows
From the Start menu, select Control Panel, Printers and
Other Hardware, Scanner and Cameras (or Control Panel,
Scanners and Cameras).
8 - 1 NETWORK SCANNING
®
98/98SE/Me/2000 Professional and XP only)
® ®
PaperPort 9.0SE on up to 5 PCs for use on a
®
98/Me/2000
®
XP
®