BMW R 1200GS 2016 Rider's Manual page 78

4
76
Press button 1 briefly to re-
spectively select the
menu item.
z
The top line of the display 2
RDC
shows .
The adjusted value appears
in the bottom line of the
display 3.
Press button 4 briefly to
change the adjusted value.
The following settings for
TPC/RDC Enduro
possible:
ON
: the TPC warning symbol is
no longer shown on the display.
Only the tire pressure outside of
the permitted tolerance is dis-
played.
OFF
symbol for TPM is dis-
played; the tire pressure outside
of the permitted tolerance is also
displayed.
Install coding plug
Switch off ignition (
RDC
Remove rider's seat (
are
ATTENTION
Penetration of dirt and mois-
ture in the open connector
: the display warning
49).
83).
Malfunctions
After removing the encoding
plug, refit the cover cap.
Remove cover cap of the plug
connection 1.
To do so, press in locking
mechanism 1 and pull off
protective cap.
Install coding plug.
Switch on the ignition.
NOTICE
If the coding plug is connected,
deactivated riding safety systems