Appendix A Hardware Specifications; Table A-1. Electrical Characteristics For The At-Gpib/Tnt (Pnp; Table A-2. Physical Characteristics For The At-Gpib/Tnt (Pnp - National Instruments AT-GPIB/TNT Getting Started

Hardware Specifications
© National Instruments Corporation
This appendix describes the electrical, physical, and environmental
characteristics of the AT-GPIB/TNT (PnP) board and the recommended
operating conditions.

Table A-1. Electrical Characteristics for the AT-GPIB/TNT (PnP)

Characteristic
Maximum GPIB Transfer Rates:
3-Wire (IEEE 488)
High Speed (HS488):
In ISA computer
Power Requirement
(from PC AT I/O channel)
* Actual speed may vary considerably from speed shown due to
system and instrumentation capabilities.

Table A-2. Physical Characteristics for the AT-GPIB/TNT (PnP)

Characteristic
Dimensions
I/O Connector
1.5 Mbytes/s*
2.2 Mbytes/s*
+5 VDC 120 mA Typical
10.67 cm by 16.51 cm
(4.2 in. by 6.5 in.)
IEEE 488 Standard 24-Pin
A-1
Appendix
A
Specification
200 mA Maximum
Specification
AT-GPIB/TNT (PnP) for Windows NT