Suzuki SWIFT Owner's Manual page 90

Folding Rear Seat: 3
OTHER CONTROLS AND EQUIPMENT
CAUTION
(Continued)
• When you hook the belt webbing
and latch plate into the seat belt
hanger, make sure the latch plate is
on the obverse side of the belt web-
bing as shown in the illustration.
• Make sure the belt webbing is not
twisted.
2) Stow the seat belt buckles of the center
and right seating position as shown in
the illustration.
4-5
CAUTION
When you fold the rear seatback for-
ward, stow the seat belt buckles of
the center and right seating position
into the seat first. This helps prevent
being caught by the seat and being
damaged.
3) Lower the adjustable head restraint (if
equipped) fully.
63J128
4) Push the release button on the top of
each split seat, and fold the seatbacks
forward.
CAUTION
After folding the rear seatback for-
ward, do not allow any foreign mate-
rial to enter the lock opening. This
may cause damage to the inside of
the lock and prevent the seatback
from being locked securely.
(1)
5) Pull the lock release strap (1) rearward
to unlatch the seat cushion.
63J056
WARNING
When you unlatch the rear seat cush-
ion, be careful that your face or
hands are not injured from the seat
popping up.
63J057
63JP0-01E