Suzuki SWIFT Owner's Manual page 186

For Australia:
SUPPLEMENT
For Saudi Arabia (GCC)
Specification Vehicle
Ignition Switch
The ignition switch has the following four
positions:
(LOCK)
This is the normal parking position. It is the
only position in which the key can be
removed.
13-1
Manual transaxle vehicles
You must push in the key to turn it to the
"LOCK" position. It locks the ignition, and
prevents normal use of the steering wheel
60B041
after the key is removed.
Automatic transaxle vehicles
Turn to "LOCK"
Push
60G033
The gearshift lever must be in the "P"
(Park) position to turn the key to the
"LOCK" position. It locks the ignition and
prevents normal use of the steering wheel
and gearshift lever.
If the gearshift lever can not be shifted out
of "P" (Park) in the normal way, follow the
procedure described below.
1) Be sure the parking brake is firmly
applied.
2) If the engine is running, stop the
engine.
3) Make sure the key is in the "ON" or
"ACC" position.
4) Remove the cover (1) over the button.
5) With pushing the release button by the
key or the flat end rod, shift the gear-
shift lever to the desired position.
(1)
62J083
63JP0-01E