Suzuki SWIFT Owner's Manual page 56

Windshield Wiper and Washer Lever: 8
Rear Window Wiper/Washer Switch: 8
STEERING COLUMN CONTROLS
EXAMPLE
With the headlights on, push the lever for-
ward to switch to the high beams (main
beams) or pull the lever toward you to
switch to the low beams. When the high
beams (main beams) are on, a light on the
instrument panel will come on. To momen-
tarily activate the high beams (main
beams) as a passing signal, pull the lever
slightly toward you and release it when you
have completed the signal.
Lights "On" reminder (if equipped)
A buzzer/chime sounds to remind you to
turn off the lights if they are left on when
the ignition key is removed and the driver's
door is opened.
2-5
Turn Signal Operation
With the ignition switch in the "ON" posi-
tion, move the lever up or down to activate
the right or left turn signals.
Normal turn signal
EXAMPLE
63J150
Move the lever all the way upward or
downward to signal. When the turn is com-
pleted, the signal will cancel and the lever
will return to its normal position.
Lane change signal
EXAMPLE
Some times, such as when changing
lanes, the steering wheel is not turned far
enough to cancel the turn signal. For con-
venience, you can flash the turn signal by
63J151
moving the lever part way and holding it
there. The lever will return to its normal
position when you release it.
63J152
63JP0-01E