Folding Rear Seats - Suzuki SWIFT Owner's Manual

Fuel Filler Cap: 5
Folding Rear Seat: 3
The fuel filler cap is located on the left rear
side of the vehicle. The fuel filler lid can be
unlocked by pulling up the opener lever
located on the outboard side of the driver's
seat and locked by simply closing the lid.
WARNING
Remove the fuel filler cap slowly. The
fuel may be under pressure and may
spray out, causing injury.
WARNING
Gasoline is extremely flammable. Do
not smoke when refueling, and make
sure there are no open flames or
sparks in the area.
Open
Close
The fuel tank filler cap has a "screw-on
ratcheting type" feature.
• To remove, turn the cap counterclock-
wise. Turn the cap slowly to allow any
residual pressure to escape.
• To install, turn the cap clockwise and
tighten it securely until a "ratcheting"
(clicking) sound is heard. The "ratchet-
ing" sound indicates that the cap is on
properly.
WARNING
If you need to replace the fuel cap,
use a genuine SUZUKI cap or its
equivalent. Use of an improper cap
can result in a malfunction of the fuel
system or emission control system. It
may also result in fuel leakage in the
event of an accident.
OTHER CONTROLS AND EQUIPMENT

Folding Rear Seats

The rear seat(s) of your vehicle can be
folded forward to provide additional cargo
space.
To fold the rear seats forward:
EXAMPLE
60G069
1) Hook the webbing and the latch plate of
the outboard lap-shoulder belts (if
equipped) in the belt hangers.
CAUTION
• When you move a seatback, make
sure both the latch plate and the
belt webbing are hooked in the seat
belt hangers so the seat belts are
not caught by the seatback, seat
hinge, or seat latch. This helps pre-
vent damage to the belt system.
63J018
(Continued)
4-4
63JP0-01E