Braking: 6 - Suzuki SWIFT Owner's Manual

Hide thumbs Also See for SWIFT:
Table of Contents

Advertisement

Using the Transaxle: 10

Braking: 6

Keep the engine speed so it does not get
into the red zone of tachometer.
WARNING
• Reduce your speed and downshift
to a lower gear before going down
a long or steep hill. A lower gear
will allow the engine to provide
braking. Avoid riding the brakes or
they may overheat, resulting in
brake failure.
• When driving on slippery roads, be
sure to slow down before down-
shifting. Excessive and or sudden
changes in engine speed may
cause loss of traction, which could
cause you to lose control.
• Make sure that the vehicle is com-
pletely stationary before you shift
into reverse.
CAUTION
• To help avoid clutch damage, do
not use the clutch pedal as a foot-
rest while driving or use the clutch
to keep the vehicle stationary on a
hill. Depress the clutch fully when
shifting.
• When shifting or starting off, do not
race the engine. Racing the engine
can shorten engine life and prevent
smooth shifting.
54G263
OPERATING YOUR VEHICLE
Braking
EXAMPLE
60G165S
The distance needed to bring any vehicle
to a halt increases with the speed of the
vehicle. The braking distance needed, for
example, at 60 km/h (37 mph) will be
approximately 4 times greater than the
braking distance needed at 30 km/h (19
mph). Start to brake the vehicle when
there is plenty of distance between your
vehicle and the stopping point, and slow
down gradually.
63JP0-01E
5-6

Advertisement

Table of Contents
loading

Table of Contents