Suzuki SWIFT Owner's Manual page 153

Tires: 6
WARNING
(Continued)
• When replacing the compact spare
tire, use a replacement tire with the
exact same size and construction.
Changing Wheels
To change a wheel, use the following pro-
cedure:
1) Remove the jack, tools and spare
wheel from the vehicle.
2) Loosen, but do not remove the wheel
nuts.
3) Jack up the vehicle (follow the jacking
instructions in the "EMERGENCY SER-
63J068
VICE" section in this manual)
4) Remove the wheel nuts and wheel.
5) Install the new wheel and replace the
wheel nuts with their cone shaped end
facing the wheel. Tighten each nut
snugly by hand until the wheel is
securely seated on the hub.
INSPECTION AND MAINTENANCE
Loosen
Tighten
63J091
Tightening torque for wheel nut
85 Nm (8.5 kg-m, 61.5 lb-ft)
6) Lower the jack and fully tighten the nuts
to the specified torque in a crisscross
fashion with a wrench as shown in the
illustration.
54G116
8-22
63JP0-01E